Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1410

3) Install the Conversion Connector.
CAUTION:
Make sure that there is no opening between the Conversion Connector and part of
HDD.
4) Fit the 2 bosses of Connector Fixing Block to the hole of Conversion Connector and install
it.
• 2 Screws (P Tight; M3x8)
CAUTION:
• Be sure to firmly hold the Connector Fixation Block when tightening the screws.
• Be sure to follow the correct order to tighten the screws, otherwise the Conversion
Connector may not be connected properly, resulting in poor contact.
9
Installation > [TYPE-11] > Installing the Removable HDD Kit > Assembling and Installing the Option HDD
5) Install the HDD Cover.
• 1 Claw
• 1 Screw (TP round end; M3x6)
F-9-911
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
F-9-912
9 Installation > [TYPE-11] > Installing the Removable HDD Kit > Assembling and Installing the Option HDD
Boss
x2
9-340
Hole
F-9-913
F-9-914
9-340