Canon imageRUNNER ADVANCE C5255 Series Service Manual page 942

COPIER > ADJUST > FEED-ADJ
ADJ-C4RE Write start pstn in horz scan: Cst4,2nd
Lv.1 Details To adjust the image write start position on the second side in the
horizontal scanning direction when feeding paper from the Cassette
4.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -55 to 55
Unit mm
Default value 0
ADJ-DKRE Write start pstn in horz scan:P-Deck,2nd
Lv.1 Details To adjust the image write start position on the second side in the
horizontal scanning direction when feeding paper from the Paper
Deck.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -55 to 55
Unit mm
Default value 0
8
Service Mode > COPIER > ADJUST > FEED-ADJ
8 Service Mode > COPIER > ADJUST > FEED-ADJ
COPIER > ADJUST > FEED-ADJ
ADJ-MFRE Write start pstn in horz scan:MP Tr, 2nd
Lv.1 Details To adjust the image write start position on the second side in the
horizontal scanning direction when feeding paper from the Multi-
purpose Tray.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -55 to 55
Unit mm
Default value 0
REG-THCK Rgst start timing adj: Heavy, 1/2 speed
Lv.1 Details To adjust the leading edge margin by changing the timing to turn ON
the Registration Motor when feeding heavy paper.
As the value is incremented by 1, the margin on the leading edge of
paper is increased by 0.1 mm.
+: Leading edge margin becomes smaller. (An image moves
upward.)
-: Leading edge margin becomes larger. (An image moves
downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
Unit mm
Default value 0
REG-OHT Rgst start timing adj: Transparency
Lv.1 Details To adjust the leading edge margin by changing the timing to turn ON
the Registration Motor when feeding transparency.
As the value is incremented by 1, the margin on the leading edge of
paper is increased by 0.1 mm.
+: Leading edge margin becomes smaller. (An image moves
upward.)
-: Leading edge margin becomes larger. (An image moves
downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
Unit mm
Default value 0
8-122
8-122