11)
Remove the Power Cable.
CAUTION:
Do not remove the
Signal Cable and the
• 1 Edge Saddle
• 3 Wire Saddles
• 1 Cable Retainer
Cable Retainer
x1
Wire Saddle
x4
9
Installation > [TYPE-11] > Installation Procedure > Removing the Signal Cable and Power Supply Cable
Fan Cable.
Edge Saddle
Signal Cable
Fan Cable
Power Cable
9
Installation > [TYPE-11] > Installation Procedure > Removing the Signal Cable and Power Supply Cable
12)
Open the HDD Lid.
• 1 Screw (Removed screw will not be used.)
13)
When the Cable Cover is installed, remove it. (Removed Cable Cover and screw will
not be used.)
• 1 Screw
F-9-894
9-335
F-9-895
F-9-896
9-335