Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1269

11) Install the IV Cable (FK2-8453 or A: HDD-Pow1, A: HDD-Sig1).
• 1 Edge Saddle
• 3 Wire Saddles
• 2 Connectors
• 1 Cable Retainer
Cable Retainer
x2
Wire Saddle
x4
Connector
12) Install the Controller Cover. (11 Screws)
9
Installation > [TYPE-3] > Installation Procedure > Assembling and Installing the Option HDD
Edge Saddle
Signal Cable
Power Cable
F-9-528
9 Installation > [TYPE-3] > Installation Procedure > Assembling and Installing the Option HDD
■ Assembling and Installing the Option HDD
1) Assemble the option HDD (1TB).
• 1 Option HDD (enclosed with option HDD)
• 1 HDD Support Plate (enclosed with option HDD)
• 1 HDD Connector Plate (enclosed with removable HDD Kit)
• 4 Vibration-prevention Dumpers (enclosed with option HDD)
• 4 Spacers (enclosed with option HDD)
• 4 Screws (W sems; M3x14) (enclosed with option HDD)
NOTE:
When tightening the screen, be sure to align the screw holes by lifting the HDD
Connector Plate and HDD.
Anti-vibration Damper
x4
HDD HDD Support Plate
HDD Connector Plate
F-9-529
Option HDD
HDD Connector Plate
HDD Support Plate
Spacer
Vibration-prevention Dumpe
F-9-530
9-199
9-199