11)
Remove the Power Cable.
CAUTION:
Do not remove the Signal Cable and the Fan Cable.
• 1 Edge Saddle
• 3 Wire Saddles
• 1 Cable Retainer
Cable Retainer
x1
Wire Saddle
x4
9
Installation > [TYPE-10] > Installation Procedure > Removing the Signal Cable and Power Supply Cable
Edge Saddle
Signal Cable
Fan Cable
Power Cable
F-9-839
9
Installation > [TYPE-10] > Installation Procedure > Removing the Signal Cable and Power Supply Cable
12)
Open the HDD Lid.
• 1 Screw (Removed screw will not be used.)
13)
When the Cable Cover is installed, remove it. (Removed Cable Cover and screw will
not be used.)
• 1 Screw
9-315
F-9-840
F-9-841
9-315