Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1032

■ INT-FACE
COPIER > OPTION > INT-FACE
IMG-CONT Connection setting of print server
Lv.1 Details To set connection with print server.
Use case At installation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 5
0: Normal mode (Print server not connected), 1, 2: Not used, 3: Print
server connected, 4, 5: Not used
Default value 0
AP-OPT [Not used]
AP-ACCNT [Not used]
AP-CODE [Not used]
NWCT-TM Timeout setting of network connection
Lv.2 Details To set the time to keep network connection between this machine
and the PC application (keep-alive setting).
As the value is incremented by 1, the time is increased by 1 minute.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 5
Unit min
Default value 5
CNT-TYPE Display of print server connection
Lv.1 Details To display an automatically connected print server.
Use case At installation of print server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 999
Default value 1
8
Service Mode > COPIER > OPTION > LCNS-TR
T-8-68
8 Service Mode > COPIER > OPTION > LCNS-TR
■ LCNS-TR
COPIER > OPTION > LCNS-TR
ST-SEND Installation state dspl of SEND function
Lv.2 Details To display installation state of SEND function when disabling the
function with license transfer.
Use case When checking whether SEND function is installed
Adj/set/operate method 1) Select ST-SEND.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-SEND.
Display/adj/set range When operation finished normally: OK!
Default value 1
TR-SEND Trns license key dspl of SEND function
Lv.2 Details To display transfer license key to use SEND function when disabling
the function with license transfer.l
Use case When replacing the device
Adj/set/operate method 1) Select ST-SEND.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-SEND.
Display/adj/set range 24 digits
ST-ENPDF Installation state dspl of encrypted PDF
Lv.2 Details To display installation state of encrypted PDF transmission function
when disabling the function with license transfer.
Use case When checking whether encrypted PDF transmission function is
installed
Adj/set/operate method 1) Select ST-ENPDF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-ENPDF.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-ENPDF Trns license key dspl of encrypted PDF
Lv.2 Details To display transfer license key to use encrypted PDF transmission
function when disabling the function with license transfer.
Use case When replacing the device
Adj/set/operate method 1) Select ST-ENPDF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-ENPDF.
Caution This mode is enabled when SEND function is installed.
Display/adj/set range 24 digits
8-212
8-212