5) Remove the rubber cap and screw.
6) Fix the scanner in place using the scanner fixing screw that has been set aside from the time of installation.
x2
7) Put paper on the copyboard glass.
8) Remove the Toner Container, Drum Unit, and Developing Assembly.
9) In the case that the floor surface is either warped or uneven, execute the ITB equilibrium position detection.
9-1) Check that the main body is in standby state.
9-2) Execute the ITB Equilibrium Position Detection Service Mode (COPIER > FUNCTION > MISC-P > ITB-INIT) (Level 1). This service
mode will take approx. 2 to 3 minutes.
9
Installation > Relocating the Machine
x2
9
Installation > Relocating the Machine
F-9-437
9-168
9-168