5
Adjustment > Image Formation System > ITB
Image Formation System
Developing Assembly
Adjustment
Initialization of Developing Assembly (toner ratio and patch) is necessary and it
procedure
differs depending on the color.
If 4 colors are replaced simultaneously, execute INISET-4.
COPIER > FUNCTION > INSTALL > INISET-Y Initialization of Y Developing
Assembly (toner ratio and patch)
COPIER > FUNCTION > INSTALL > INISET-M Initialization of M Developing
Assembly (toner ratio and patch)
COPIER > FUNCTION > INSTALL > INISET-C Initialization of C Developing
Assembly (toner ratio and patch)
COPIER > FUNCTION > INSTALL > INISET-K Initialization of Bk Developing
Assembly (toner ratio and patch)
COPIER > FUNCTION > INSTALL > INISET-4 Initialization of 4-colors Developing
Assembly (toner ratio and patch)
After replacement, execute the user mode (Settings/Registration > Adjustment/
Maintenance > Adjust Image Quality > Auto Adjust Gradation).
Patch sensor
How to Replace
Refer to "Remove the Patch Sensor (front,center,rear)".
the Parts
Adjustment
When replacing the Patch Sensor, enter the alpha value of the Patch Sensor in the
procedure
following service mode.
COPIER > ADJUST > DENS > P-ALPHA Input Patch Sensor alpha value
After replacement, execute the user mode (Settings/Registration > Adjustment/
Maintenance > Adjust Image Quality > Auto Adjust Gradation).
ITB Unit
How to Replace
Refer to "Removing the ITB Unit".
the Parts
Adjustment
After replacement, execute the user mode (Settings/Registration > Adjustment/
procedure
Maintenance > Adjust Image Quality > Auto Adjust Gradation).
5
Adjustment > Image Formation System > ITB
ITB
How to Replace
Refer to "Removing the ITB".
the Parts
Adjustment
Execute the user mode (Settings/Registration > Adjustment/Maintenance > Adjust
Procedure
Image Quality > Auto Adjust Gradation).
T-5-6
T-5-7
T-5-8
5-5
T-5-9
5-5