Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1221

NOTE:
Steps 10 and 11 apply to "USB Device Port-E3" only.
10) Assemble the DP Base and the DB Base Cover.
• 2 Bosses
• 4 Hooks
NOTE:
Align 2 hooks [A] and bosses (long holes) to the DP Base and then insert them. The
installation will be difficult if the positioning holes for bosses are aligned first.
Hook [A]
Boss
Hook
9
Installation > USB Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2/A3 > Installation Procedure > Installing the USB Device Port
Hook [A]
Hook
F-9-398
9 Installation > USB Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2/A3 > Installation Procedure > Installing the USB Device Port
11) Install the Wire Saddle to the DP Lower Cover Unit which was assembled in the
previous step.
• Install the Wire Saddle (Small) on the upper side.
• Install the Wire Saddle (Large) on the bottom side.
Wire Saddle (Small)
9-151
Wire Saddle (Large)
F-9-399
9-151