10)
Install the 2 Reader Joints (Right) by fitting them to the L-mark side.
• 1 Bosses each
• 2 Screws (Binding; M4x8) each
11)
Affix the Reader Damper only on the rear side of the Reader Joint (Right).
NOTE:
Be sure to align it with the marking lines.
x4
12)
Affix the Reader Damper to the Hinge Plate on the rear left side of the machine.
NOTE:
Be sure to align it with the marking lines.
9
Installation > Printer Cover-C2 > Installation Procedure
Reader
Boss
Boss
Damper
F-9-140
Marking Line
9
Installation > Printer Cover-C2 > Installation Procedure
13)
Remove the Top Rear Cover of the Printer Cover Unit.
• 2 Screws (The removed screws will be used in step 25.)
• 5 Hooks
x2
14)
Remove the Top Cover of the Printer Cover Unit.
• 2 Screws (The removed screws will be used in step 24.)
• 3 Hooks
x2
F-9-141
Hook
F-9-142
Hook
F-9-143
9-58
9-58