24)
Install the Card Reader Installation Plate (rear) to the host machine.
• 2 Screws (TP; M3x12)
x2
25)
Connect the Card Reader External Relay Harness to the connector of Card Reader
Unit.
• 1 Connector
• 1 Edge Saddle
CAUTION:
Be sure that the core is inside the Edge Saddle.
Connector
Edge
Saddle
9
Installation > Copy Card Reader-F1 > Installation Procedure
26)
Plate (rear).
• 4 Screws (TP; M3x6)
CAUTION:
Do not pinch the harness.
F-9-273
27)
F-9-274
9
Installation > Copy Card Reader-F1 > Installation Procedure
Install the Card Reader Mounting Plate (front) Unit to the Card Reader Mounting
x4
Remove the 2 covers of Cord Guide.
6
9-104
F-9-275
F-9-276
9-104