Canon imageRUNNER ADVANCE C5255 Series Service Manual page 465

4
Parts Replacement and Cleaning > Image Formation System > Removing the Secondary Transfer Outer Roller and Secondary Transfer Separation Guide Unit > Procedure
1) Place the paper to put the Secondary Transfer Outer Roller Unit.
2) Remove the rear stopper.
• 1 claw
3) Pinch the claws on both sides of bearing holder and remove the Secondary Transfer Outer
Roller Unit.
• 4 claws
x4
4 Parts Replacement and Cleaning > Image Formation System > Removing the Secondary Transfer Outer Roller and Secondary Transfer Separation Guide Unit > Procedure
4) Remove the Secondary Transfer Separation Guide Unit.
• 1 bushing
• 2 springs
F-4-222
5) Remove the Secondary Transfer Outer Roller.
• 2 bearing holders
• 2 bearings
Bearing holder
F-4-223
Spring
Spring
Bushing
Secondary transfer
separation guide unit
Bearing
Secondary transfer
outer roller
4-145
F-4-224
Bearing holder
Bearing
F-4-225
4-145