Board - Canon imageRUNNER ADVANCE C5255 Series Service Manual

BOARD

OPTION
BOARD > OPTION
MENU-1 Hide/dis of printer setting menu level 1
Lv.2 Details To set whether to display or hide the level 1 of printer setting menu.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
MENU-2 Hide/dis of printer setting menu level 2
Lv.2 Details To set whether to display or hide the level 2 of printer setting menu.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
MENU-3 Hide/dis of printer setting menu level 3
Lv.2 Details To set whether to display or hide the level 3 of printer setting menu.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
MENU-4 Hide/dis of printer setting menu level 4
Lv.2 Details To set whether to display or hide the level 4 of printer setting menu.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
SURF-OFF UFR board function ON/OFF
Lv.1 Details To set ON/OFF of the function according to the SURF board
connection status.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
8
Service Mode > BOARD > OPTION
8 Service Mode > BOARD > OPTION
BOARD > OPTION
TR-DSP Hide/dis of toner reduction function
Lv.2 Details To set whether to display or hide the toner reduction function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
8-250
T-8-91
8-250