4
Parts Replacement and Cleaning > Pickup Feed System > Removing the Cassette 2 Pickup Unit > Procedure
Removing the Cassette 2 Pickup Unit
■ Preparations
1) Pull the Cassette1 and Cassette2.
2) Remove the Right Lower Cover.(Refer to page 4-193)
3) Remove the Cassette Right Upper Cover.(Refer to page 4-199)
•
■ Procedure
1) Remove the Right Lower Sub Cover 2 and the Right Rear Inner Cover simultaneously.
• 2 Screws
• 1 Shaft Support
Right lower sub cover 2
4
Parts Replacement and Cleaning > Pickup Feed System > Removing the Cassette 2 Pickup Unit > Procedure
Right rear inner cover
x2
2) Remove the Pickup Harness.
• 1 wire saddle
• 1 edge saddle
• 2 connectors
x2
x2
3) Remove the Cassette 2 Pickup Unit.
• 4 screws
x4
4-200
Connector
Wire saddle
Edge saddle
Connector
F-4-395
Cassette 2 pickup unit
F-4-396
4-200