Canon imageRUNNER ADVANCE C5255 Series Service Manual page 578

● Mounting New HDD
After HDD set as the service parts is mounted, the new HDD should be formatted initially. In
this case, the message is shown to confirm if the new HDD is mounted.
The figure below shows the abbreviated steps.
Replacing HDDs
Start the machine in Safe mode
(by pressing 2 and 8 keys simultaneously on the numeric keypad)
Connect to SST
Confirm that the new HDD is successfully mounted
Format HDD (Format ALL)
Follow the steps as described in Format ALL section.
6
Troubleshooting > Version upgrade > Version Upgrade via SST > Formatting HDD
F-6-53
6 Troubleshooting > Version upgrade > Version Upgrade via SST > Formatting HDD
When the new HDD is mounted, the machine cannot be started in the normal procedure.
Start the machine in Safe mode as Download mode. When gaining connection to SST, the
message is shown to confirm if the new HDD is mounted.
Click "Yes" and the message is shown, confirming whether to format HDD.
Click "Initialize" button to initialize HDD (Format ALL). Follow the steps described in Format
ALL section to download the system software.
6-40
F-6-54
F-6-55
6-40