4
Parts Replacement and Cleaning > Image Formation System > Removing the Main Drive Unit > Preparations
5) Pull out the toner container.
CAUTION:
At installation, make sure to insert the Toner Container all the way in and close the
small cover.
4
Parts Replacement and Cleaning > Image Formation System > Removing the Main Drive Unit > Preparations
F-4-240
F-4-241
Removing the Main Drive Unit
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.(Refer to page 4-175)
2) Remove the Right Rear Cover.(Refer to page 4-147)
3) Remove the Left Rear Cover and the Left Rear Sub Cover.(Refer to page 4-147)
4) Remove the Connector Cover.
• 1 screw
5) When the Cassette Pedestal is installed, remove the connector.
• 1 reuse band
• 6 harness guides
• 5 connectors
Connectors
x7
x5
4-150
F-4-242
Connectors
Reuse Band
Harness Guides
F-4-243
4-150