Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1396

10) Place the Controller Box to the original position. (2 Screws or 3 Screws)
11) Affix the Shutdown Caution Label in the appropriate language on the Right Rear
Cover 1. (Included in the Removable HDD Kit).
12) Install the removed cover and the cable.
• Rear Cover (2 Screws, 2 Rubber Caps)
• Left Rear Sub Cover (1 Screw)
• Reader Communication Cable (when reader is installed)
• Left Rear Cover (2 Screws, 2 Rubber Caps)
13) If Reader is installed, install the Reader Power Cable.
NOTE:
Handle the Reader Power Cable from the connector side and make a slack at [A] part.
Bend the Reader Power Cable at a right angle on [B] part.
9
Installation > [TYPE-10] > Installing the Encryption Board
F-9-876
9 Installation > [TYPE-10] > Installing the Encryption Board
x2
x2
Wire Saddles
14) Install the Right Rear Cover 1. (3 Screws)
15) Affix the LED label so that it fits the edge of the Right Rear Cover 1.
LED Label
16) Close the Right Rear Cover 1, Right Lower Cover, and Right Upper Cover.
17) Connect the power plug of the host machine to the power outlet.
9-326
[A]
Cable Guide
[B]
Reader Power Cable
Connectors
F-9-877
Right Rear Cover 1
F-9-878
9-326