Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1257

15) Install the IV Cable (FK2-8453 or A: HDD-Pow1, A: HDD-Sig1).
• 2 Screws (screw removed in step 14))
x2
16) Install the IV Cable (FK2-8453 or A: HDD-Pow1, A: HDD-Sig1) of HDD Drawer Unit.
• 2 Screws
• 2 Springs
• 2 Washers (Use the parts removed in step 13).)
x2 IV Cable
Washer
Spring
Screw
9
Installation > [TYPE-2] > Installation Procedure > Assembling and Installing the Removable HDD
17)
• 2 Screws (Use the screw removed in step 12))
F-9-488
18)
• 3 Wire saddles
NOTE:
•
•
•
F-9-489
9 Installation > [TYPE-2] > Installation Procedure > Assembling and Installing the Removable HDD
Install the HDD Drawer Unit.
x2
Fix the cable of the Drawer Unit.
Close the [A] part of unused wire saddle and edge saddle.
Short Signal Cable and Power Cable will not be used.
Fix the unused Signal Cable and the Power Cable with the wire saddle.
Wire saddles
x3
9-187
F-9-490
[A]
[A]
F-9-491
9-187