Advertisement
Chapter 6: Arrhythmia Monitoring
ARR SETUP Window allows you to set the arrhythmia monitoring based on the patient needs.
The arrhythmia events and relevant settings are displayed in two columns. Unrelated settings to a
specific arrhythmia are shown by a dash and the settings which could not be changed for a
specific arrhythmia are dimmed.
Select an arrhythmia event to access ECG/ARR/SETUP/CHANGE WINDOW (figure 14-4) and
perform the arrhythmia settings.
Figure 14-4 ECG/ARR/ / SETUP/CHANGE WINDOW
Exit this window after that the settings are made.
●
ALARM LEVEL
Available options are 1, 2 and OFF to set the alarm level for every arrhythmia event. (For
more detail about alarm levels, refer to the chapter Alarm).
NOTE:
ALARM LEVEL for "ASYSTOLE", "VFIB" and "VTAC" cannot be set and
always is in level 1.
ECG/ARR ANALYSIS /ARR SETUP WINDOW
6-6
User Manual
Advertisement
Chapters
