Advertisement
Chapter 15: BFA Monitoring
User Manual
Figure 12-4 BFA module
BFA module keys and indicators
Power Indicator: This indicator is turned on as BFA module is connected to the monitor and
remains ON until the module is disconnected
(
).
Alarm Indicator: If "BFA ELECTRODE ALARM" occurs (resulting from inappropriate
connection of neuro sensors), this indicator will flash with frequency of 1 Hz (
).
Impedance key: Impedance measurement is initiated by pressing this key (
and its indicator
)
(
flashes on the module for one second.
)
BFA module keys and indictors
15.2.2 BFA on patient monitor
BFA Module Setup
1- Turn on BFA module by connecting it to the monitor.
2- Connect the patient cable to BFA module.
15-8
Advertisement
Chapters
