Advertisement
Chapter 1: Introduction
1.5 Buttons Function
The monitor can be operated via the front panel buttons, rotary knob and touch screen*
18
17
16
①
Power
②
Freeze
③
REC/STOP
④
HOME/MENU
⑤
START/STOP
⑥
Alarm Silence
NOTE:
For more specific information on alarms of each parameter, refer to Appendix II.
NOTE:
If a new alarm occurs under alarm silence condition, silence mode will be removed.
⑦
Rotary Knob
8
9
6
13
15
14
Press to power on or off the system.
When in normal mode, press to freeze all waveforms on the screen.
When in freeze mode, press to restore the waveform refreshing.
Press to start a real time recording of ECG signal and all monitoring
parameters by the central system or internal recorder of the monitor.
Press during recording to stop it.
Press to open HOME WINDOW. Please refer to Chapter Configuration
for details.
Press to start a blood pressure measurement. While measuring, press it
again to stop the measurement.
Press it to disable alarm for 120 s. A countdown timer appears and
Silence symbol blinks on the Header area every 5 sec. If you press it
again, the system will exit from silence mode and alarm sound will be
enabled.
This knob can be used to select and change the settings. Operations can
be performed by turning it clockwise, counter clockwise or pressing it
down.
The square frame that moves with the knob turning, functions as a
"cursor".
When no menu is displayed, turning the knob clockwise can locate the
5
4
2
3
11
12
10
1-13
User Manual
1
7
Advertisement
Chapters
