Advertisement
Chapter 5: ECG Monitoring
CABLE TYPE
To adjust ECG measurement mode to "3 WIRES", "5 WIRES "and "10 WIRES".
DISPLAY FORMAT
In case of choosing "3 WIRES" for CABLE TYPE: only Cascade mode is applicable
for DISPLAY FORMAT.
In case of choosing "5 WIRES" for CABLE TYPE: The following options will be
available for DISPLAY FORMAT.
o Cascade: in this mode, only main lead (ECG TRACE 1) can be changed and ECG
signal is displayed in two traces.
o 2 TRACES: the signals of two leads are displayed in two traces. You can select
any lead for ECG TRACE 1, but selected leads for TRACE 2 and TRACE 1
cannot be the same.
o 4 TRACES: the signals of four leads are displayed in this mode. You can select
any lead for ECG TRACE 1, but selected leads for ECG TRACE 2, TRACE 3 and
TRACE 4 cannot be the same.
o 7 TRACES: the signals of the seven ECG leads are displayed in this mode. Only
main lead can be changed.
In case of choosing "10 WIRES" for CABLE TYPE: 12 TRACES as well as above
options will be available for DISPLAY FORMAT.
o 12 TRACES: ECG signals of twelve leads are displayed in 12 traces. The main
lead in this mode always is lead I and cannot be changed.
5-15
User Manual
Advertisement
Chapters
