Advertisement
Chapter 15: BFA Monitoring
Warning
Because the BFA patient cable are too thin pay attention not to subject them under tension.
Warning
Use only the recommended BFA cable and neuro sensor for BFA monitoring. Other
accessory may cause improper performance.
Warning
Do not repair defective BFA cables and send it for after sale service. Manufacturer does
not take responsibility for measurement accuracy of repaired cable.
3- After communication is established, you can monitor different BFA parameters such as BFI%,
BS%, SQI%, EMG% and also EEG signal on the patient monitor.(At first only EEG signal can
be monitored and after 20 seconds, other parameters appear on the monitor).
BFA on patient monitor
When highlight is placed at BFA area, press the knob, the following window (BFA large page)
will pop up:
BFA large page
15-9
User Manual
Advertisement
Chapters
