Advertisement
Chapter 1: Introduction
The following sockets are located on the side panel .
■ Power Supply: 100-240 (VAC), 50/60 Hz (Socket
■ VGA SLAVE MONITOR (Socket
Monitor interface for external standard VGA color monitor.
Working mode:
Interface:
How to use:
1) Install the VGA slave monitor in the same room with the patient but keep it away from
the patient more than 1.5m. The monitor is intended to be used as an assistant monitoring
device.
2) Plug the connection cable while the VGA slave monitor is off.
3) Power on the VGA slave
4) Adjust brightness and contrast properly.
)
)
800×600,256 colors
D-sub 15 pins
Pin 1. Red Video
Pin 2. Green Video
Pin 3. Blue Video
Pin 4. Ground
Pin 5. NC
Pin 6. Red Ground
Pin 7. Green Ground
Pin 8. Blue Ground
, same time or after powering on the monitor
monitor
1-16
User Manual
Pin 9. NC
Pin 10. Ground
Pin 11. NC
Pin 12. NC
Pin 13. Horizontal Sync
Pin 14. Vertical Sync.
Pin 15. NC
.
Advertisement
Chapters
