Advertisement
Chapter 1: Introduction
1.4 Display Screen
Patient monitor has a color LED display. The patient Parameters, waveforms, alarm messages,
bed number, date, system status and error messages are displayed on the screen.
The screen is divided into four areas: Header Area; Waveform Area/ Menu Area; Parameter Area
and Message Area (see figure 1-2).
Header Area:
The Header Area is at top of the screen displaying operating state of the monitor and status of the
patient.
The parameters in Header Area are page number, bed number, type of patient (adult, pediatric or
neonate), patient name, current date and time.
The above information appears on the screen throughout the monitoring process.
Other information of the Header Area comes up only with respective monitoring status.
They are:
■
appears when the system is connected to central system.
■
appears when the system is recording.
■
indicates the remaining battery charge.
■
blinks along with a countdown timer (120 sec) when the alarm silence button is pressed.
1-10
User Manual
Advertisement
Chapters
