Advertisement
Chapter 13: GAS Monitoring (Mainstream)
■
GAS/RESP
Pick to determine that respiration evaluation is performed by "Multi-gas" or "RESP"
module. Available options are "GAS" and "RESP". When selecting "RESP", the system
switches GAS module to standby mode, and toggle to display RESP waveform and
parameters.
NOTE:
If only CO2 module is enabled, the CAPNO / RESP for this option will be displayed,
otherwise the GAS / RESP will be displayed.
■
FILL SIGNAL
Pick "ON" to show the waveform in a filled form.
■
CO2 ALARM
Pick "CO2 ALARM" in GAS WINDOW to call up the following menu:
CO2 ALARM
Pick "ON" to enable alarm functions such as parameters blinking, audio alarm and light
indicator. Pick "OFF" to disable the alarm functions and there will be a "
the Parameter Area.
ALARM LEVEL
Selectable between 1and 2. Level 1 represents the most serious case.
CO2 /ALARM WINDOW
13-15
User Manual
" symbol in
Advertisement
Chapters
