Advertisement
Chapter 20: Bed to Bed
-
Selected Bed
NONE. Turn the rotary knob or touch the screen to change setting.
NOTE:
"REMOTE BED No." in the header area must be identical to the
"SELECTED BED No.".
-
Duration
: Select time of displaying the window. Default setting is 1 min. Available
options are 2 to 5 min.
-
After above settings are performed, press <STATR> to view numeric parameters and
signals of the selected bedside. Press the button again to change it to <STOP>.
ACTIVE TIME is a counter that starts from zero to the time set for Duration. The window will
be closed when counting finishes.
: Select one bedside connected to the Central system. Default setting is
20-2
User Manual
Advertisement
Chapters
