Download Print this page

Saadat ALBORZ B9 Operator's Manual page 27

Patient monitor

Advertisement

Chapter 2: Configuration
When Display Format is set to7 Traces, seven traces of ECG signal are displayed).
You can monitor ECG (2 traces), CO2 (RESP) and SpO2 signals as well as all numeric
P3 :
parameters (special page for Rainbow parameters) (MAIN DISPLAY= PAGE 3 mode)
You can monitor ECG signal (12 traces) and numeric parameters of P1.
P4:
(Only with settings of CABLE TYPE: 10WIRES and DISPLAY FORMAT: 12 TRACES,
you can access this page)
 If IBP module is ON:
NOTE:
In all pages except page 6, you can monitor BFA signal and numeric parameters only if
BFA module is enabled.
The following signals will be displayed in this page for different Display Formats:
P1:
a) CASCADE/2 TRACES: ECG signal (two traces), SpO2, IBP1, IBP2 and RESP/CO2
b) 4 TRACES: ECG (four traces), IBP1 and IBP2 signals
c) 7 TRACES: Seven traces of ECG signal
Numeric parameters HR, PVCs, ST, SpO2%, PR, IBP1, IBP2, RESP/CO2, NIBP and TEMP
are also displayed in this page. (MAIN DISPLAY= PAGE 1 mode)
You can monitor same parameters and signals as P1, but arrangement of parameters
P2 :
windows differ slightly from P1. (MAIN DISPLAY= PAGE 2 mode)
(When Display Format is set to 4 Traces, four traces of ECG signal as well as SpO2 and
RESP/GAS signals are displayed in this page.
When Display Format is set to7 Traces, seven traces of ECG signal are displayed).
*
You can monitor ECG (2 traces), CO2 (RESP), IBP1/IBP2 and SpO2 signals as well as
P3
:
all numeric parameters (special page for Rainbow parameters) (MAIN DISPLAY= PAGE 3
mode).
: You can monitor ECG, IBP1 and IBP2 signals (in a larger scale) as well as numeric
P4
parameters HR, PVCs, ST, SpO2%, PR, IBP1,IBP2, NIBP and TEMP (special page for large
scale IBP) (MAIN DISPLAY= PAGE 4 mode)
You can monitor ECG (two traces), IBP1, SpO2 and RESP signals as well as all numeric
P5:
parameters of P1 except IBP2 (MAIN DISPLAY= PAGE 5 mode).
*
You can monitor ECG, SpO2, RESP/CO2 and two IBP (IBP1,2 or IBP 3,4) signals as
P6
:
well as all numeric parameters of P1 and IBP3,4 parameters. (special page for 4 channels
2-4
User Manual

Advertisement

loading