Advertisement
Chapter 18: Recording
NOTE:
Thermo sensitive surface of paper should be placed facing the head. make sure to
place the paper correctly.
a. incorrect placement
NOTE:
The paper detector may not operate properly if covered with foreign matter.
Therefore, if you find foreign matter on the sensor, remove it and clean the sensor.
Warning
While the recorder is working, the record paper goes out steadily. By pulling the paper, the
recorder will be damaged.
NOTE:
If the paper is jammed, open the recorder door and remove the paper. Do not pull
the paper by force.
NOTE:
Be careful when inserting paper. Avoid damaging the thermosensitive printhead. Do
not touch thermosensitive print head.
NOTE:
It is recommended to use the paper with coloured marks intended to aware that the
paper is near to finish. Otherwise, the operator should be sure about sufficient
paper for recording.
b. correct placement
18-8
User Manual
Advertisement
Chapters
