Advertisement
Chapter 24: Care and Cleaning
The following table summarizes the methods of cleaning, disinfecting and sterilizing different
parts of the device:
Device parts
External surface of device
BFA module
* Trolley/ Wall stand,
* Holders of accessory,
* Extension cables
Display screen
Recorder (printhead)
ECG Accessory
SpO2 Accessory
NIBP Cuff
TEMP Accessory
IBP Accessory
GAS Accessory
(Main-stream/Side-stream)
CO Accessory
Single-
Cleaning
use
-
In-between patients
and as required wipe
disposable
gently using a moist
electrodes
cloth and warm soapy
water or mild
detergent.
-
In-between patients
and as required:
-
Clean and soft cloth
with screen cleaner or
mild soapy water
as required:
1.Gently wipe around
the printhead using
cotton swabs
dampened with
alcohol.
-
2.After the alcohol has
completely been dried,
reload the paper and
close the recorder
door.
disposable
electrodes
disposable
sensor
-
-
disposable
According to the instructions delivered with the reusable accessories
transducers
To clean, disinfect and sterilize reusable transducers, sensors, cables, leads, and so
and Domes
forth, refer to the instructions delivered with the accessory.
disposable
Airway
Adapter,
Nemoline
family
sampling
lines
-
24-6
User Manual
Disinfection
In-between patients and as
required use
■ Alcohol 70%
■ Isopropyl alcohol
■ N-propanol
In-between patients and as
required use
■ Isopropyl alcohol
use as required
■ Isopropyl alcohol
Sterilization
To avoid extended
damage to the equipment,
sterilization is not
recommended for this
monitor, related products,
accessories or supplies
unless otherwise indicated
in the Instructions for Use
that accompany the
accessories and supplies
or when stipulated as
necessary in the Hospital
Maintenance Schedule.
Advertisement
Chapters
