Chapter 24: Care and Cleaning
Accessories
To clean, disinfect and sterilize reusable transducers, sensors, cables, leads, and so forth,
refer to the instructions delivered with the accessories.
Also, trolley/ wall stand, accessory holders
be cleaned and disinfected after each patient or when necessary, using a soft, clean cloth
soaked in mild soapy water and, if necessary, Isopropyl alcohol, and then wiped with a
soft and dry cloth.
Warning
1) To avoid damaging of the cable, probe, sensor or connector, do not immerse it in any liquid.
2) Disposable accessories shall not be sterilized or reused.
3) To prevent environmental pollution, the disposal of single-use accessories shall be done in
accordance with the policies of the hospital.
1
Holders (or Bracket, Clamp) for accessories such as IBP and GAS.
2
Extension cables for accessories such as IBP and BFA.
1
and extension cables
24-5
User Manual
2
(if applicable) should