Advertisement
Chapter 13: GAS Monitoring (Mainstream)
13.2 GAS WINDOW
The following items are displayed in CO2 parameter window:
If Multi-gas sensor is used, GAS parameter window will be as follows:
NOTE:
After Masimo Sweden AB capnography probe is connected to the monitor, at first
sensor type (ISA or IRMA) is detected by the system and then displayed in front of
the CO
signal.
2
NOTE:
System displays Gas window for IRMA sensor as default. If when Gas window is
open ISA probe is connected to the system, by exiting this window and entering it
again you can change this window for ISA sensor.
CO2 PARAMETER WINDOW
GAS PARAMETER WINDOW
13-11
User Manual
Advertisement
Chapters
