Advertisement
Chapter 2: Configuration
User Manual
Choose "NETWORK SETUP" in MODULE SETUP window to call up the following window in
which you can perform the Central system settings and see bedside and Central IP addresses,
time of network connection and etc.
SIGNAL QUALITY: The signal strength during WiFi connection of the bedside to the Central
system.
Choose "MASIMO VERSION" in MODULE SETUP window to call up the following window
in which you can observe MASIMO module information, set frequency and enable intended
MASIMO parameter by connecting programmer.
Choose PROGRAMMING MODE >> in HOME/MODULE SETUP/MASIMO VERSION
WINDOW to open the respective menu after a delay of 5 seconds. If programming procedure is
not done, the system will exit from this mode and return to normal working mode.
This item is only available to trained and authorized personnel.
2-9
Advertisement
Chapters
