Advertisement
Chapter 3: Alarm
3.1 ALARM
Pick "ALARM" in HOME MENU to call up the following window:
■ ALARMS ON/OFF
Pick "ON" to enable the alarm functions.
Pick "OFF" to disable the alarm functions such as audio alarm, parameters blinking and alarm
light indicator. In "OFF" mode there will be
changes alarm settings of all parameters, but you are able to turn on/off alarm of a specific
parameter in its own window.
■ ALARM FREEZE
Pick "ON" to freeze all the related signals when parameter's value violates adjusted alarm limits.
In freeze mode, press "Freeze" button on the front panel to release the waveform refreshing.
Pick "OFF" to disable ALARM FREEZE.
■ ALARM VOLUME
Pick "ALARM VOLUME" to set the volume of alarm sound. The selection ranges from 1 to
1 represents minimum volume, while 7 represents maximum volume.
NOTE:
All other settings in this menu are about alarm ON/OFF and alarm high/low limit of
measurable parameters. You are able to set these items in the related parameters
menu. Refer to each module's chapter for details
symbol beside all parameters. This function
3-2
User Manual
.
7
Advertisement
Chapters
