Advertisement
Chapter 1: Introduction
-
New patient information (For details, please refer to chapter Configuration, PATIENT
INFORMATION)
-
Patient mode (Adult/Neonate/ Pediatric) before NIBP measurement
-
Alarm sound
-
Alarm limits
-
Zeroing before IBP measurement (For more information, see chapter IBP)
-
Pulse oximetry (For more information, see chapter SpO2)
-
RESP (For more information, see chapter RESP)
NOTE:
Check all the functions of modules that may be used and make sure that the monitor
is in good connection.
Warning
If any sign of damage is detected, or the monitor displays any error messages, do not use it
on any patient. Contact biomedical engineer in the hospital or local After Sale Service
immediately.
Connect Patient Sensors
Connect all the necessary accessories between the monitor and the patient.
NOTE:
For any information about correct connection of accessories, refer to each module's
chapter.
1-7
User Manual
Advertisement
Chapters
