a.
Verify configuration card is properly oriented and fully inserted.
b.
Clean configuration card contacts with isopropyl alcohol, reinstall, and then
retest.
c.
Swap configuration card with a known working card to test operation.
d.
The configuration card enables miscellaneous features in the system.
525-Sheet Feeder Does Not Function
1.
Thermal safety fuse blown.
a.
Power cycle system.
b.
The safety fuse is a self resetting device, power cycling ensures the fuse
cools enough to reset itself.
2.
525-Sheet Feeder is faulty.
a.
Turn off system and wait 30 seconds for power supply capacitors to
discharge.
b.
Replace the 525-Sheet Feeder.
c.
Perform full test of system.
4-66
WorkCentre C2424 Service Manual