Xerox WorkCentre C2424DX Service Manual page 171

Print Engine Exercise Menu Functions (Continued)
This submenu contains a group of functions intended to stimulate a specific portion of
the print engine system in such a way that the test can be observed. Listening
observations may be required for certain tests and will prompt you on the control
panel if covers, doors, or trays need to be removed.
Main Menu --> Print Engine Menu --> Exercise Menu
Test Name
Heaters Menu
Print Engine Check Menu Functions
This submenu contains a group of tests that perform specific measurements on
portions of the print engine and report measured values to the control panel. These
values may then be compared with range limits documented in the service manual, or
using service bulletins on the service website (if the values were unavailable at the
time of printing).
Main Menu --> Print Engine Menu --> Check Menu
Test Name
Check Menu
See the individual table descriptions starting on page 4-15 for all Check/Activator menu
items.
Check All
Activators Menu
Shafts Menu
Fans Menu
Heaters Menu
Paper Path Menu
Drive Menu
Drum Menu
Motors Menu
Misc. Menu
General Troubleshooting
Description
Allows the heaters to be forced to an ON or OFF condition
or to be toggled from one condition to the other. Also
provides monitoring to observe the resulting heater power
or temperature.
Monitor heaters
Monitor Temperatures
All Heaters On (warmup to normal operating
setpoints with Ink Melt Heaters OFF).
All Heaters Off
Toggle Printhead Heaters
Toggle Preheat Heater
Toggle Drum Heater
Toggle Ink Melt Heaters (The Ink Melt heaters
are on only for 4 seconds).
Description
Results
Results
4-13