Fuzzy Text/Image - Xerox WorkCentre C2424DX Service Manual

Fuzzy Text/Image

Step Questions and Actions
Cycle power to the system, this will cause an
1 1.
automatic calibration cycle.
Does the text or image still appear fuzzy?
2.
Print the Graphics Demo for a fuzzy image
2 1.
or the Configuration Page for fuzzy text.
Does the text or image still appear fuzzy?
2.
Make a copy of the embedded page printed
3 1.
in Step 2, using the document feeder.
Does the text or image still appear fuzzy?
2.
Perform the "Manual DADF to Scanner
4 1.
Calibration" on page 6-9.
Does the text or image still appear fuzzy?
2.
Check and/or adjust the control panel copy
5 1.
settings. Print the Troubleshooting Print
Quality information page from the control
panel and review Output Quality and Color
Settings section to aid in adjusting copy
settings.
Did this correct the problem?
2.
Use the flatbed to make a copy of the
6 1.
embedded page printed in Step 2.
Did this correct the problem?
2.
5-6
Yes
Go to Step 2.
The problem is
with the print
engine, see
"Fuzzy Text" on
page 5-22.
Go to Step 4.
Go to Step 5.
Complete.
Replace the
scanner
assembly.
WorkCentre C2424 Service Manual
No
Complete.
Go to Step 3.
Go to Step 5.
Complete.
Go to Step 6.
Replace the
DADF.