Xerox WorkCentre C2424DX Service Manual page 189

Paper Sensor Bounce Times (Continued)
Paper is picked and moved through either the simplex paper path to determine the paper trailing
edge bounce interval at each paper path sensor. R values have alternate definitions or are
unused depending on the pick tray and if simplex or duplex path was selected.
R# Definition
Paper Size
1
Tray 4 Pick
Tray 4 Pick Bounce
2
Interval (us)
Tray 3 Pick
Tray 3 Pick Bounce
3
Interval (us)
Tray 2 Pick
unused
2
unused
3
Tray 1 Pick
unused
2
unused
3
Common
Deskew Bounce
4
Interval (us)
Preheat Bounce
5
Interval (us)
Strip Bounce
6
Interval (us)
Exit Bounce Interval
7
(us)
General Troubleshooting
Typical
Value Actions
MFG Reports size of the picked paper.
Only
MFG Reports the interval during which the Tray 4
Only Pick sensor bounces following the passage of
the paper trailing edge.
MFG Reports the interval during which the Tray 3
Only pick sensor bounces following the passage of
the paper trailing edge.
MFG
Only
MFG
Only
MFG
Only
MFG
Only
MFG Reports the interval during which the Deskew
Only sensor bounces following the passage of the
paper trailing edge.
MFG Reports the interval during which the Preheat
Only sensor bounces following the passage of the
paper trailing edge.
MFG Reports the interval during which the Strip
Only sensor bounces following the passage of the
paper trailing edge.
MFG Reports the interval during which the exit
Only sensor bounces following the passage of the
paper trailing edge.
4-31