Table of Contents
Advertisement
Jam Code Troubleshooting Procedures
Exit module (MEP) malfunction during paper exit.
K2X
Ensure supported media.
1.
Inspect the media path for obstructions.
2.
Verify scanner power supply and MEP control board operation, see page 4-70.
3.
Inspect the exit module for defects or damaged components.
4.
Replace the exit module MEP control board.
5.
Replace the exit module MEP.
6.
IIT cover open during abnormal IIT shutdown.
L2A
IIT cover open during normal IIT shutdown.
L2B
IIT cover open during mechanical recovery.
L2C
IIT cover open during warm-up.
L2D
IIT cover open while in ready state.
L2E
IIT cover open while in a fault state.
L2F
IIT cover open during auto drum maintenance cycle.
L2G
IIT cover open during printhead maintenance cycle.
L2H
IIT cover open during printhead purge.
L2J
IIT cover open during transfix.
L2K
IIT cover open in standby mode.
L2L
IIT cover open during pick from Tray 2.
L2M
IIT cover open during pick from Tray 3.
L2N
IIT cover open during pick from Tray 4.
L2P
IIT cover open during pick from Tray 1.
L2Q
IIT cover open during pick from duplex.
L2R
IIT cover open during staging for transfix.
L2S
IIT cover open during transfix.
L2T
IIT cover open during print drum maintenance.
L2V
IIT cover open while imaging.
L2W
3-56
(Continued)
WorkCentre C2424 Service Manual
Advertisement
Table of Contents
Troubleshooting
