Electronics
Scanner Power Supply
(PL 5.2)
Warning
Unplug the power cord. The scanner power supply connects directly to the
AC line.
1.
Remove the DADF and scanner assemblies (page 8-4).
2.
Remove the output tray (page 8-8).
3.
Remove the left and right side covers (page 8-11).
4.
Remove the rear cover and EMI shield (page 8-12).
5.
Disconnect all wiring cables to the power supply board.
6.
Remove 4 short screws connecting the scanner supply board to the back frame.
7.
List and remove the scanner power supply.
Service Parts Disassembly
Scanner Assembly Power Supply Board
s2424-211
8-59