Pick Assembly - Xerox WorkCentre C2424DX Service Manual

Pick Assembly

(PL 3.18)
1. Remove Tray 2 from the system.
2.
Reach into the tray cavity and release the light-colored catch holding the pick
roller in place.
Note
The catch is located on the ceiling of the tray cavity about 1/4 of the way
across the unit from the right side and about 5 in. (12.5 cm.) back. When you
pull forward on the catch, the roller swings down.
1
2
3.
Pull down to remove the roller.
Note
Replace the retard roller at the same time you replace the pick assembly.
This roller is located in the Tray 2 media tray.
Service Parts Disassembly
s2424-026
s2424-024
8-49