Check Paper Path Menu - Xerox WorkCentre C2424DX Service Manual

Check Paper Path Menu

Paper Drive Power
Test picks paper from selected tray (test currently supports picking from Tray 2 only) and moves it
through either the simplex or duplex paper path to determine paper path power requirements.
R# Definition
Tray
0
Paper Size
1
Unused
2
Unused
3
Tray 2 Pick Average
4
Power (watts)
Paper Lead Edge Times
Paper is picked and moved through either simplex or duplex paper path to determine leading
edge arrival time at each paper path sensor. R values have alternate definitions or are unused
depending on the pick tray and if simplex or duplex path was selected.
R# Definition
Common
Tray
0
Paper Size
1
Tray 4 Pick
Tray 4 Pick Interval
2
(us)
Tray 4 Transport
3
Interval (us)
Tray 3 Transport
4
Interval (us)
General Troubleshooting
Typical
Value Actions
MFG Reports the tray from which the test paper was
Only picked.
MFG Reports the size of the picked paper.
Only
MFG
Only
MFG
Only
MFG Reports average of the power over the pick
Only interval (begin pick to Deskew sensor).
Typical
Value Actions
MFG Reports the tray from which the test paper was
Only picked.
MFG Reports the size of the picked paper.
Only
MFG Reports the interval from the time the engine
Only software is commanded to start the tray 4 pick
process until the Tray 4 Pick sensor activates.
MFG Reports the interval from the Tray 4 Pick
Only sensor activation until the Tray 3 Pick sensor
activates.
MFG Reports the interval from the Tray 3 Pick
Only sensor activation until the Deskew sensor
activates.
4-27