Exit Module (Mep) Board - Xerox WorkCentre C2424DX Service Manual

Exit Module (MEP) Board

(PL 5.1)
1.
Remove the DADF and scanner assemblies (page 8-4).
2.
Remove the output tray (page 8-8).
3.
Remove the left and right side covers (page 8-11).
4. Remove the rear cover and EMI shield (page 8-12).
5.
Disconnect all wiring to the exit module board.
6.
Remove 2 screws securing the board to the back frame.
8-60
Exit Module Board
WorkCentre C2424 Service Manual
s2424-212