White Stripes (Pinstripes) - Xerox WorkCentre C2424DX Service Manual

White Stripes (Pinstripes)

Step Questions and Actions
Print the service test print 13-19 Solid Fills,to
1 1.
reveal an X-axis problem. See "21: Primary
Solid Fills 10x" on page 5-43 for more
information.
Are the pinstripes apparent on the test
2.
prints?
Verify the X-axis motion is operating
2 1.
correctly and that poorly dressed cables,
loose screws, or mechanical failures are not
interfering.
Remove any obstructions or redress cables.
2.
Did this correct the problem?
3.
Verify there are no wiring harnesses
3 1.
interfering with the horizontal movement of
the printhead.
Redress any faulty wiring.
2.
Repair or replace any defective part or
3.
interference with the printhead.
Did this correct the problem?
4.
5-32
This print-quality problem has a series of regularly
spaced white stripes approximately 6 mm (.25 in.) apart.
If the X-Axis Drive does not move the printhead
smoothly and evenly during printing, vertical lines appear
in the print.
s2424-089
Yes
Go to Step 2.
Complete.
Complete.
WorkCentre C2424 Service Manual
No
Complete. The
problem is not
with the print
engine.
Go to Step 3.
Replace the
X-axis drive.