Xerox WorkCentre C2424DX Service Manual page 208

Paper Path Status (Continued)
This test enters the paper path sensors to identify if anything would prevent a page from printing.
The control panel will display messages indicating if anything unexpected is found for: R0 = upper
paper path; R1 = tray 1; R2 = tray 2; R3 = tray 3; and R4 = tray 4. The display is a string of 0's and
1's (one digit for each sensor state) and is listed below from most significant bit to least significant
bit.
1 = an item that needs to be corrected.
0 = normal
R# Definition
2, 3,
4
2, 3,
4
Temperature Status
This test scans the thermocouples and reports data on the current temperature with the goal of
providing a picture of the current temperature state of the system. All degrees are reported in
Celsius.
R# Definition
Reservoir Temp
0
Left Jetstack
1
Right Jetstack
2
Preheater Temp
3
Drum Temp
4
Ink Melt 1 Temp
5
Ink Melt 2 Temp
6
Ink Melt 3 Temp
7
Ink Melt 4 Temp
8
4-50
Typical
Value Actions
MFG 1 - media width middle
Only
MFG 0 - Media width bottom
Only
Typical
Value Actions
Reports the current temperature
o
~127.7
Reports the current temperature
o
~134
Reports the current temperature
o
~134
Reports the current temperature
o
~62
Reports the current temperature
o
~60
Yellow (usually off)
o
~50
Cyan (usually off)
o
~50
Magenta (usually off)
o
~50
Black (usually off)
o
~50
WorkCentre C2424 Service Manual