9,0Xx.xx Errors - Ink Loader Faults - Xerox WorkCentre C2424DX Service Manual

9,0XX.xx Errors - Ink Loader Faults

9,000.44:
These fault indicate a problem with the ink loader.
9,005.49:
Ink loader fault. The cyan ink melt heater is on, but the ink does not
appear to be dripping.
9,006.41:
Ink loader fault. The magenta ink melt heater is on, but the ink does not
appear to be dripping.
9,007.42:
Ink loader fault. The yellow ink melt heater is on, but the ink does not
appear to be dripping.
9,008.43:
Ink loader fault. The black ink melt heater is on, but the ink does not
appear to be dripping.
Troubleshooting Procedure
Step Questions and Actions
Are the ink sticks all Xerox branded ink?
1 1.
Manually verify that the ink stick is able to
2 1.
advance in the ink loader chute.
Run the appropriate Ink Melt [1, 2, 3, 4]
3 1.
Heater test.
1 = Yellow
2 = Cyan
3 = Magenta
4 = Black
Did the test pass?
2.
9,009.44 and 900X.6x
9,009.44:
This fault code indicates a device failure attempting to access NVRAM.
a.
Reset NVRAM and retest.
b.
Ensure ground integrity for the system (see "Ensuring Ground Integrity" on
page 4-73).
3-22
Yes
Go to Step 2.
Go to Step 3.
Replace the
printhead.
WorkCentre C2424 Service Manual
No
Advise
customer.
Remove any
blockage and/
or replace the
ink stick.
Replace the ink
loader
assembly.