Xerox WorkCentre C2424DX Service Manual page 124

Troubleshooting Procedure (Continued)
Step Questions and Actions
Inspect and reseat the wiring to the ink
4 1.
loader.
Did this correct the problem?
2.
13,000.6x Errors - Program Faults
13,001.62:
Thermals failed to read from system NVRAM.
13,002.63:
Value is not in valid range.
13,003.64:
Thermal control task received an unexpected message.
13,004.65:
Thermal control task was expecting initialization message, but received
other.
13,005.66:
Thermal code tried to command a segment ID that did not exist.
13,006.67:
Thermal code tried to command a segment ID that did not exist.
13,007.68:
Thermal power manager task was expecting initialization message, but
received other.
13,008.60: Thermal power manager task received an unexpected message.
a.
Reset NVRAM and retest.
b. Ensure ground integrity for the system (see "Ensuring Ground Integrity" on
page 4-73).
3-32
Yes
Replace the ink
loader.
WorkCentre C2424 Service Manual
No
Replace the I/O
board.