Xerox WorkCentre C2424DX Service Manual page 9

Never move the system if you receive a Power Down Error-Head not Parked
message at the system's control panel. This message means the system is not ready to be
moved. If the printhead is not locked, the system can be damaged during shipment.
Always turn off the system using the power switch, located under the interface cover on
the right side of the system, and unplug all cables and cords. Do not turn off the system by
pulling the power cord or using a power-strip with an on/off switch.
Always secure the scanhead shipping restraint on the left side of the scanner to lock the
scanhead before removing the scanner portion of the system. Shipping the scanner with
the scanhead unlocked can damage the scanner.
2424-107
Always remove the document feeder before shipping the system.
Always remove the scanner before shipping the system.
The system is heavy and must be lifted by two people. The illustration below shows the
proper technique for lifting the system.
42 kg
93 lbs.
2424-109
Always move the system separately from optional Trays 3 and 4.
Service Manual v