Vertical Lines Appear Wavy - Xerox WorkCentre C2424DX Service Manual

Vertical Lines Appear Wavy

Step Questions and Actions
There may be too much oil on the drum.
1 1.
Inspect and clean the maintenance kit wiper
2.
blade.
If necessary, replace the maintenance kit.
3.
Did this correct the problem?
4.
Check the motion of the X-axis and verify
2
1.
there is nothing interfering such as a poorly
dressed cable or screw.
Replace any defective parts.
2.
Did this correct the problem?
3.
Use service diagnostics to run the Y-axis
3
1.
encoder test.
Is the Y-axis encoder functioning properly?
2.
Use service diagnostics to verify the drum
4 1.
maintenance cam roller and pivot plate are
operating correctly.
Did this correct the problem?
2.
Image-Quality Troubleshooting
Straight vertical lines appear to be wavy and ill-formed.
s2424-084
Yes
Complete. Go to Step 2.
Complete. Go to Step 3.
Go to Step 4. Replace the
drum assembly.
Complete. Replace the
pivot plate or
drum
maintenance
cam roller if
damaged.
No
5-27